Rigid Foams

UrePac® Rigid products can range from low density foams (10-100kg/m3) for insulation applications to high density foams (101-1000kg/m3) for structural components.

Why Rigid Foams?
UrePac® Rigid foams are widely acknowledged for their excellent insulation values, energy efficiency and high strength to weight properties.

Typical Applications

Low-density foams are used for,

  • Insulation
  • Building Panels
  • Hot Water Systems
  • Cooler Boxes

High-density foams are predominantly used for,

  • Structural Furniture Components
  • Simulated Wood Mouldings.

PRODUCTS

Find out more!

Please contact us for more information on this product.

    EXCELLENT

    Insulation Values

    EFFICIENT

    Energy

    HIGH STRENGTH TO

    Weight Properties

    Types of Rigid Foams

    This product list is a typical example of the rigid foams supplied in these applications. If you require any polyurethane systems not listed please contact our specialists to discuss your requirements further.

    Zero Ozone Depletion Potential (ODP) Excellent insulation performance 1:1 v/v mix ratio

    Product Code Cream Time (s) Free Rise Density (kg/m3) TDS SDS(GHS) Description Features
    UrePac Rigid 3 34 (Fire Retardant) 3 34 UrePac Rigid 3 34 SDS Urepac Rigid 3 34 Polyol UrePac® Rigid 3 34FR (AUSFOAM 30) is a low density rigid polyurethane Spray Foam system specifically formulated to provide a highly flame retarded foam system with a nominal ‘applied’ density of 35 kg/m3 depending on application parameters. It is formulated for use in commercial / industrial wall and ceiling insulation applications where the foam is applied into installed stud work / framed construction. It is to be installed according to the applicable Building Code of Australia regulations and design codes
    • Highly Fire Retardant
    • Excellent Surface Finish
    • 1:1 Mix Ratio for Standard Graco Equipment
    UrePac Rigid 3 30 Chlorine Free 3 30 UrePac Rigid 3 30 Chlorine Free Spray Foam SDS Urepac Rigid 3 30 Chlorine Free Polyol UrePac® Rigid 3 30CF is a low density rigid polyurethane Spray Foam system based on polyether polyols and MDI isocyanate. It has been specifically formulated to be halogen free for application to stainless steel. The product has excellent insulation and reactivity for horizontal and vertical application.
    • Zero ODP
    • Seamless, Durable and Waterproof
    • Halogen Free for Stainless Steel
    UrePac Rigid 3 50 3 50 Urepac Rigid 3 50 SDS Urepac Rigid 3 50 Polyol
    UrePac Rigid 4 100 4 100 UrePac Rigid 4 100 SDS Urepac Rigid 4 100 Polyol UrePac® Rigid 4 100 is a low density rigid polyurethane Spray Foam system based on polyether polyols and MDI isocyanate. It has been specifically formulated to be a medium density structural spray foam.
    • Zero ODP
    • Seamless, Durable and Waterproof
    • High Strength to Weight Properties
    UrePac Rigid 6 9 6 9 Urepac Rigid 6 9 SDS Urepac Rigid 6 9 Polyol UrePac® Rigid 6 9 is an ultra low density ‘open cell’ Spray Foam system specifically formulated to provide a foam with a nominal ‘applied’ core density of 8-10 kg/m3 (1/2 pound) depending on application parameters. It is formulated for use in commercial / residential wall and ceiling insulation applications where the foam is applied into installed stud work / framed construction. It is to be installed according to the applicable Building Code of Australia regulations and design codes.
    • Over 100 Times Expansion
    • Excellent Acoustic and Thermal Insulation Properties
    • 1:1 Mix Ratio for Standard Graco Equipment

    Excellent insulation performance for general purpose machine dispense applications.

    Product Code Cream Time (s) Free Rise Density (kg/m3) TDS SDS(GHS) Description Features
    UrePac Rigid 18 28 18 28 UrePac Rigid 18 28 SDS Urepac Rigid 18 28 Polyol UrePac® Rigid 18 28 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed for fast curing and excellent insulation performance for general purpose machine dispense applications.
    • Exceptional Insulation
    • Fast Demould
    • 1: v/v mix ratio
    UrePac Rigid 16 44 16 44 Urepac Rigid 16 44 SDS Urepac Rigid 16 44 Polyol UrePac® Rigid 16 44 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed to be processed through high or low pressure dispensing machinery with excellent insulation performance for general purpose applications.
    • Zero ODP and GWP
    • Exceptional Insulation
    • Excellent Flow

    Product Code Cream Time (s) Free Rise Density (kg/m3) TDS SDS(GHS) Description Features
    UrePac Rigid 3 34 (Fire Retardant) 3 34 UrePac Rigid 3 34 SDS Urepac Rigid 3 34 Polyol UrePac® Rigid 3 34FR (AUSFOAM 30) is a low density rigid polyurethane Spray Foam system specifically formulated to provide a highly flame retarded foam system with a nominal ‘applied’ density of 35 kg/m3 depending on application parameters. It is formulated for use in commercial / industrial wall and ceiling insulation applications where the foam is applied into installed stud work / framed construction. It is to be installed according to the applicable Building Code of Australia regulations and design codes
    • Highly Fire Retardant
    • Excellent Surface Finish
    • 1:1 Mix Ratio for Standard Graco Equipment
    UrePac Rigid 3 30 Chlorine Free 3 30 UrePac Rigid 3 30 Chlorine Free Spray Foam SDS Urepac Rigid 3 30 Chlorine Free Polyol UrePac® Rigid 3 30CF is a low density rigid polyurethane Spray Foam system based on polyether polyols and MDI isocyanate. It has been specifically formulated to be halogen free for application to stainless steel. The product has excellent insulation and reactivity for horizontal and vertical application.
    • Zero ODP
    • Seamless, Durable and Waterproof
    • Halogen Free for Stainless Steel
    UrePac Rigid 3 50 3 50 Urepac Rigid 3 50 SDS Urepac Rigid 3 50 Polyol
    UrePac Rigid 4 100 4 100 UrePac Rigid 4 100 SDS Urepac Rigid 4 100 Polyol UrePac® Rigid 4 100 is a low density rigid polyurethane Spray Foam system based on polyether polyols and MDI isocyanate. It has been specifically formulated to be a medium density structural spray foam.
    • Zero ODP
    • Seamless, Durable and Waterproof
    • High Strength to Weight Properties
    UrePac Rigid 6 9 6 9 Urepac Rigid 6 9 SDS Urepac Rigid 6 9 Polyol UrePac® Rigid 6 9 is an ultra low density ‘open cell’ Spray Foam system specifically formulated to provide a foam with a nominal ‘applied’ core density of 8-10 kg/m3 (1/2 pound) depending on application parameters. It is formulated for use in commercial / residential wall and ceiling insulation applications where the foam is applied into installed stud work / framed construction. It is to be installed according to the applicable Building Code of Australia regulations and design codes.
    • Over 100 Times Expansion
    • Excellent Acoustic and Thermal Insulation Properties
    • 1:1 Mix Ratio for Standard Graco Equipment

    Product Code Cream Time (s) Free Rise Density (kg/m3) TDS SDS(GHS) Decription Features
    UrePac Rigid 50 15 50 15 UrePac Rigid 50 15 SDS Urepac Rigid 50 15 Polyol UrePac® Rigid 50 15 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed as a very low density, open cell, thermoformable block foam for acoustic insulation applications.
    • Fire Retardant (Addition of UrePac +3106 used to meet Automotive Under Bonnet Fire Performance Specifications)
    • Excellent Acoustic Performance
    • Slow Reactivity for Block Foam production
    UrePac Rigid 70 70 70 70 Urepac Rigid 70 70 SDS Urepac Rigid 70 70 Polyol UrePac™ Rigid 70 70 is a slow reactivity, two component polyurethane (PUR) rigid foam based on polyether polyol, PMDI isocyanate and zero ozone depletion potential (ODP) blowing agent technology (HFC). The system has been developed so it can be dispensed through low and high pressure equipment or hand-mixed and poured. The foam was designed for use as a medium density PUR block foam with a core density of 60-65 kg/m3 for general purpose thermal insulation applications.
    • High Strength
    • Slow Reactivity
    • Low Viscosity
    UrePac Rigid 80 130 80 130 UrePac Rigid 80 130 SDS Urepac Rigid 80 130 Polyol UrePac™ Rigid 80 130 is a slow reactivity, two component polyurethane (PUR) rigid foam based on polyether polyol and MDI isocyanate. The system has been developed so it can be dispensed through low and high pressure equipment or hand-mixed and poured. The foam was designed for use as a high density PUR block foam with a core density of 120 kg/m3 for general purpose structural applications.
    • High Strength
    • Slow Reactivity
    • 1:1 v/v Mix Ratio
    UrePac Rigid 90 160 90 160 Urepac Rigid 90 160 SDS Urepac Rigid 90 160 Polyol UrePac™ Rigid 90 160 is a slow reactivity, two component polyurethane (PUR) rigid foam based on polyether polyol and MDI isocyanate. The system has been developed so it can be dispensed through low and high pressure equipment or hand-mixed and poured. The foam was designed for use as a high density PUR moulded block foam with a core density of 160 kg/m3 for general purpose structural and applications
    • High Strength
    • Slow Reactivity
    • 1:1 w/w Mix Ratio
    UrePac Rigid 90 370 90 370 UrePac Rigid 90 370 MSDS Urepac Rigid 90 370 Polyol UrePac® Rigid 90 370 is a high density, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. It was formulated to be a slow reacting, structural foam for hand mix or machine dispensed general purpose mouldings.
    • Exceptional Strength to Weight Rroperties
    • Long Reaction Times
    • Excellent Impact Resistance